Catalina - Capri - 25s International Assocaition Logo(2006)  
Assn Members Area · Join
Association Forum
Association Forum
Home | Profile | Register | Active Topics | Forum Users | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 Catalina/Capri 25/250 Sailor's Forums
 Catalina 25 Specific Forum
 Keel Winch Forces
 New Topic  Topic Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

Boomeroo
Navigator

Member Avatar

Australia
128 Posts

Initially Posted - 12/21/2018 :  05:42:03  Show Profile
I note the Keel winch guide states a 45 Lb loading as max onto the handle which is about 1 ft long . ie 45 ft lb torque should lift the keel . I note the new Ryobi brushless drill has an output of 62 ft lb.
So has anyone used a Battery drill to wind up the winch . Maybe this is the 1st drill with the capacity. Brushless Drills relatively new .Keel raising is important.

I leave my keel down then as I enter shallow water I lift it up 10 turns then continue in until nearly aground then raise it fully . No chances ever taken of the keel dropping fully down uncontrolled .
Yes if it did let go no damage just hard to get off mainly mud .
Any experience appreciated .

Graeme Bishop boomeroo Australia
C25 SK
  Previous Topic Topic Next Topic  
 New Topic  Topic Locked
 Printer Friendly
Jump To:
Association Forum © since 1999 Catalina Capri 25s International Association Go To Top Of Page
Powered By: Snitz Forums 2000 Version 3.4.06
Notice: The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.