Notice:
The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.
Has anyone installed the pivot pin bushing from CD on their centerboard? I just got the boat out of the water and need to work on the centerboard. It looks like the one at CD was/is for the C25 but I assume all that is the same as was used on the C250's. The play in my board has gotten excessive - not to mention that it doesn't have the spacers that it is supposed too.
Well I have figured this all out now. My board was a complete disaster and now is looking near perfect. Russ asked that I write something up on this and since all I was finding was bits and pieces of how to do this. I had to figure it out and make it up as I went along. So I'll try to do that so any of the rest of you out there have some procedural thoughts on how to do it. :- )
Notice: The advice given on this site is based upon individual or quoted experience, yours may differ. The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.