Not Yet!
Table - 1/4" x 3/4" teak strips, epoxy covered.
Not Yet!
Bottom of table - Wobbly Table cure. A small turnbuckle is used with a quick pull pin. The turnbuckle is tightened by hand to hold the table down firmly in the side mounts, no wobble. To release, unscrew the turnbuckle a couple turns, pull the pin at the bottom.
Not Yet!
Bed - Starboard seat back folded down to make bed. We lay a quilted moving pad on top of it before we put down the bedding for a seamless feel. Larger than a queensize bed.
Not Yet!
TV Stand - Mounting detail and location for a television.
Not Yet!
Cockpit Bed - Boards across cockpit seats form bed.
Reina II
Dinette Interior - Block of wood wedged between the table and pin rail to hold table firmly into the brackets. You can see a wood strip just below the starboard seat that a piece of plywood lays on top of and spans across to the dinette seating area and a similiar thickness cushion is used to complete the bed.
Reina II
Stove - factory gimbaled alcohol stove. Battery selector switch connects to two battries under the seat.
Snickerdoodle
Galley modifications - Origo alcohol stove fits nicely where the factory curtain burner went. Note the wood work behind the stove, Slats keep food items secure under way, remove at anchor for easy access.
Home
Association Forum
Ships Store
Cruising
Racing
Ebay Searches
Technical Tips
Amazon Store
Gallery
Owners
Manuals & Brochures
Swap Meet
Links
Flag Line & Staff
Bylaws & Constitution
Galley Tips
