Notice:
The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.
In case anyone else needs them, here are the dimensions required for a PHRF NW rating application for my 2006 C250WK. The source of all dimensions is Catalina and their sailmaker. Some dimensions can be found on the Catalina web site as well, but not all.
LOA 26' 11" LWL 21' 3" Beam 8' 6" Draft 3' 5" Displacement 4200 lbs Ballast 1050 lbs Rig I 29' J 9' P 24' 5" Main E 11' (Rig) 10.9' (Sail) HB 4" MGM 6' 8" MGU 3' 8" (I am going to try to forget that they gave me this measurement a 2nd time as 2'.) Jib LLJ 28' 2" LP 12' 2"
Yes, I could have just taken my sails down, laid them out somewhere, measured them, used the Jib halyard to run a tape to the top of the mast, etc etc. But that would take away from my sailing time, whereas emails don't... :-)
Kevin Mackenzie Former Association Secretary and Commodore "Dogs Allowed" '06 C250WK #881 and "Jasmine" '01 Maine Cat 30 #34
Notice: The advice given on this site is based upon individual or quoted experience, yours may differ. The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.