Notice:
The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.
Couldn't find the post about the elbow in the C250 bilge pump tube end, but what a great mod.
Get's my vote on the easiest most effective mod for the C250.
It took 10mins to: Remove the hose from the end filter. Cut the scraggy end off the hose. Cut about 8" of hose off the end. Rebed the filter to one end of the cutoff Fit a 1" Plastic elbow ($0.78) on the other end of the elbow. Fit the end of the tube from the pump to the other side of the elbow. Tape all three joints with rigging tape. All done.
So whoever posted the mod with the elbow and red tubing - Kudos!
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by dlucier</i> <br />I'm thinking this has something to do with a bilge pump?... <hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote"> With a <i>filter</i>?
Notice: The advice given on this site is based upon individual or quoted experience, yours may differ. The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.