Catalina - Capri - 25s International Assocaition Logo(2006)  
Assn Members Area · Join
Association Forum
Association Forum
Home | Profile | Register | Active Topics | Forum Users | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 Catalina/Capri 25/250 Sailor's Forums
 Swap Meet
 Catalina 25 SR/FK parts $500
 New Topic  Topic Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

txbigfoot
Navigator

Member Avatar

USA
194 Posts

Initially Posted - 12/29/2008 :  15:02:43  Show Profile
I am near to dropping the boat in the dump. Anyone want the boat? I will sell all that is left for $500. Bring your trailer or i can trailer it to any nearby water. interior is complete first one with the money has a cheap prize. the only parts off the hull are the stern pulpit, windows and pop top. no sails. no furler

Edited by - on

delliottg
Former Mainsheet C250 Tech Editor

Members Avatar

USA
4479 Posts

Response Posted - 12/29/2008 :  19:32:06  Show Profile  Visit delliottg's Homepage
Dan,
Do you still have the winches? I'd be interested in both if you do.

Edited by - on
Go to Top of Page

txbigfoot
Navigator

Members Avatar

USA
194 Posts

Response Posted - 12/30/2008 :  01:31:27  Show Profile
I have both the Lewmar winches. and one of the winches from the mast.
Dan

Edited by - on
Go to Top of Page

britinusa
Web Editor

Members Avatar

USA
5404 Posts

Response Posted - 12/30/2008 :  08:28:29  Show Profile  Visit britinusa's Homepage
Dan, if you still have the winches, that says there must be a slew of other stuff on board..

Cleats, jam cleats, lights, pockets, etc, etc.

would help you get some dollars back (but I guess it's a time issue, time to pull the stuff off).

I bet you would sell every bit of it over here.

Paul

Edited by - on
Go to Top of Page

txbigfoot
Navigator

Members Avatar

USA
194 Posts

Response Posted - 12/30/2008 :  08:32:38  Show Profile
I have lots of parts but not enough interest. I have had the boat advertised here for a while and have had a few parts sold piecemeal. I am tired of the boat being around. I just want out from under it. That is the reason for the low price. Want a boat?????????

Edited by - on
Go to Top of Page

GaryB
Master Marine Consultant

Members Avatar

USA
4312 Posts

Response Posted - 12/30/2008 :  10:11:22  Show Profile
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by txbigfoot</i>
<br />I have lots of parts but not enough interest. I have had the boat advertised here for a while and have had a few parts sold piecemeal. I am tired of the boat being around. I just want out from under it. That is the reason for the low price. Want a boat?????????
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">

Dan,

I think over the past few months there have been a lot of questions asked and some confusion as to what was actually sold and what is left.

Could you write up <u><b>one</b></u> list of everything still on the boat and post it here. <font color="blue">Pictures of everything would be even better!</font id="blue">

I bet it would be gone in a week.


Edited by - GaryB on 12/30/2008 10:13:19
Go to Top of Page

JimB517
Past Commodore

Members Avatar

USA
3285 Posts

Response Posted - 12/30/2008 :  11:29:51  Show Profile  Visit JimB517's Homepage
And drop the prices, a few dollars less than Catalina Direct was not a good deal.

I'd buy the goosneck.

Edited by - on
Go to Top of Page

Ed Cassidy
Captain

Members Avatar

USA
365 Posts

Response Posted - 12/30/2008 :  13:03:30  Show Profile
And.......
List the prices at the same time. Heck, pull all the hardware and trim off it, ditch the boat and then sell off the pieces. Don't take orders, just list what you have. I'm only trying to help.

Edited by - on
Go to Top of Page

delliottg
Former Mainsheet C250 Tech Editor

Members Avatar

USA
4479 Posts

Response Posted - 12/30/2008 :  13:27:22  Show Profile  Visit delliottg's Homepage
Dan,
I've sent you an email regarding the winches. I agree with the guys, if you want to spend the time removing hardware, you could probably sell all or most of it here in a very short amount of time.

Edited by - on
Go to Top of Page

txbigfoot
Navigator

Members Avatar

USA
194 Posts

Response Posted - 12/30/2008 :  21:09:16  Show Profile
Question to all: I was asking only 1/2 of the CD prices on the used parts. I had bought a couple of items like the spreader upgrade kit and a chainplate upgrade kit that were new and never installed. On those items I was asking a little less than what I paid for and just trying to minimize my loss on those. Were these unreasonable expectations?

I will post what is left and I will get picts when available.

Dan

Edited by - on
Go to Top of Page

dmpilc
Master Marine Consultant

Members Avatar

USA
4593 Posts

Response Posted - 12/31/2008 :  13:00:41  Show Profile
Your pricing sounds reasonable to me.
Unfortunately (or perhaps I should say fortunately), I can't think of any parts that I really need right now, and being "temporarily retired" I'm in a spending lock-down.

Edited by - on
Go to Top of Page

HeelinPatrick
Navigator

Members Avatar

USA
102 Posts

Response Posted - 12/31/2008 :  14:32:14  Show Profile
I feel it would be real helpful if you were to list each part one by one, and put your best price with it.

The reason I mention this, I've been trying to get a handful of items either from this site or ebay or wherever. I have yet to sucessfully purchase anything from this site for various different reasons. It seems that too much back and forth will hamper the process, and you get left with the parts. So, anything you can do to help make sales easy for both ends would be great!

Pat

Edited by - on
Go to Top of Page

txbigfoot
Navigator

Members Avatar

USA
194 Posts

Response Posted - 12/31/2008 :  16:58:48  Show Profile
Thank you for the input. I have a mostly complete boat so i will post a few things that I can think of and place a few prices with these items.
Mast/shrouds (complete) $400
Boom (set up for jiffy reefing) $200
Motor Bracket $100
Cushions (foam is good, will need recovering to make nice) $100
Winches Lewmar (set of 2) $500
Single Lewmar from mast $100
Spreader Bracket upgrade kit NEW $100
Chainplate upgrade kit NEW $75
Fixed Rudder $300

These are just a few of the items I could think of at the top of my head. If I made a mistake in the pricing I would be happy to see if the list agrees or disagrees and I will make the change accordingly. I have other parts so feel free to ask.

List of parts that are sold:
all sails
windows
pop top
stern rail


Dan

Edited by - on
Go to Top of Page

Ed Cassidy
Captain

Members Avatar

USA
365 Posts

Response Posted - 12/31/2008 :  22:55:09  Show Profile
I think you are a good bit overpriced on all but the mast and shrouds. You listed $1800 plus for what you wanted $500 for. These are mostly 30 year old parts that can be found on ebay quite a bit cheaper.

Edited by - on
Go to Top of Page

txbigfoot
Navigator

Members Avatar

USA
194 Posts

Response Posted - 12/31/2008 :  23:37:13  Show Profile
Thank you for the input. I have a mostly complete boat so i will post a few things that I can think of and place a few prices with these items. I have readjusted the prices based loosely on CD. I dont think half of new is unreasonable for a good used part. I am selling the boat as a whole for a cheap price purely out of a convenience factor. I am also being charged storage and I am tired of that as well.


Mast/shrouds (complete) $400
Boom (set up for jiffy reefing) $125
Motor Bracket $80
Cushions (foam is good, will need recovering to make nice) $90
Winches Lewmar (set of 2) $175
Single Lewmar from mast $80
Spreader Bracket upgrade kit NEW $110 (CD is $140)
Chainplate upgrade kit NEW $100 (CD $125)
Fixed Rudder $200 (CD was $650)
Anchor Locker Hatch $100 (CD is $219)
Forward Hatch $125 (CD $322)
Cockpit Hatch $60 each
Teak 5 loop rails $45 for set of 2 (CD $90 for the pair)



These are just a few of the items I could think of at the top of my head. If I made a mistake in the pricing I would be happy to see if the list agrees or disagrees and I will make the change accordingly. I have other parts so feel free to ask.

List of parts that are sold:
all sails
windows
pop top
stern rail



Edited by - txbigfoot on 12/31/2008 23:39:40
Go to Top of Page

cleffe
Deckhand

Members Avatar

USA
21 Posts

Response Posted - 01/01/2009 :  15:50:10  Show Profile
just throwing my opinion out there. if you would truely like to sell these 30yr. old parts stop trying to get all you can for them. make them a steal, and they will disapear quickly. i tried to get some stanchions from you and you wanted 60% of CD price (which are thicker stainless), not much of a deal so i purchased new ones. if i were you i would sell them for roughly 25% or less of CD prices. they will go fast, you will make a little coin, and the problem is solved. If you want to try and squeeze top dollar out of these parts you have to be willing to hold on to them for a long while. just my thoughts, good luck.

Edited by - on
Go to Top of Page

txbigfoot
Navigator

Members Avatar

USA
194 Posts

Response Posted - 01/01/2009 :  19:31:05  Show Profile
The one I was selling you was one that I had just bought brand new from CD. I thought 60% original price was fair for a brand new one. I thought it was a dam good deal. Man it seems like you can never make anyone happy.
I dont think it is unreasonable to sell used parts for 1/2 off of new. I have bought several items here for roughly half of new and was grateful I was able to afford parts on a budget. If you guys dont think half of new is fair then go buy brand new from CD. Like I have said many times to several members here, make me a reasonable offer. I get offers that are ridiculous like a mast offer for $75 or an offer to buy a set of stanchions for $35. So surely you can understand my frustration. Of course, parts like blown out sail or severely worn or worthless junk parts are a different story.

Bottom line: make me a reasonable offer for a part and it is yours!

Edited by - txbigfoot on 01/01/2009 19:36:53
Go to Top of Page

Ed Cassidy
Captain

Members Avatar

USA
365 Posts

Response Posted - 01/01/2009 :  20:48:03  Show Profile
Dan,
If you take Paypal and you'll take $100 for the Chainplate and spreader kit, mark them sold. I realize they are a good bit more at CD but you bought them awhile back when they less expensive, you can't offer a guarantee and if you don't have a C25, they are useless hardware. If nothing else, perhaps I'll start a bidding war. We could call it eSwap.

Edited by - on
Go to Top of Page

Windhover
1st Mate

Members Avatar

USA
35 Posts

Response Posted - 01/03/2009 :  09:28:05  Show Profile
Dan, I would be interested in the rudder if still available, what year is your boat? Thanks.

Edited by - on
Go to Top of Page

MiNO
1st Mate

Members Avatar

USA
32 Posts

Response Posted - 01/05/2009 :  21:49:04  Show Profile
Dan,

Do you have the drop-down doors for the cabin? Also, which year and model type are the cushions for?
-K

Edited by - on
Go to Top of Page

timuchan
Deckhand

Members Avatar

1 Posts

Response Posted - 01/25/2009 :  09:06:04  Show Profile
I want the three winches and mast deck plate.<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by txbigfoot</i>
<br />Thank you for the input. I have a mostly complete boat so i will post a few things that I can think of and place a few prices with these items.
Mast/shrouds (complete) $400
Boom (set up for jiffy reefing) $200
Motor Bracket $100
Cushions (foam is good, will need recovering to make nice) $100
Winches Lewmar (set of 2) $500
Single Lewmar from mast $100
Spreader Bracket upgrade kit NEW $100
Chainplate upgrade kit NEW $75
Fixed Rudder $300

These are just a few of the items I could think of at the top of my head. If I made a mistake in the pricing I would be happy to see if the list agrees or disagrees and I will make the change accordingly. I have other parts so feel free to ask.

List of parts that are sold:
all sails
windows
pop top
stern rail


Dan
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">

Edited by - on
Go to Top of Page

John H
Deckhand

Members Avatar

1 Posts

Response Posted - 01/28/2009 :  15:00:42  Show Profile
Dan -

Hunting for the:
Forepeak hatch
ice box drain valve
and a tiller

for a C25 1983.

Thanks,

John

Edited by - on
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Topic Locked
 Printer Friendly
Jump To:
Association Forum © since 1999 Catalina Capri 25s International Association Go To Top Of Page
Powered By: Snitz Forums 2000 Version 3.4.06
Notice: The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.