Catalina - Capri - 25s International Assocaition Logo(2006)  
Assn Members Area · Join
Association Forum
Association Forum
Home | Profile | Register | Active Topics | Forum Users | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 Catalina/Capri 25/250 Sailor's Forums
 General Sailing Forum
 '89 Evinrude 9.9 outboard
 New Topic  Topic Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

skrenz
Captain

Member Avatar

USA
351 Posts

Initially Posted - 08/26/2010 :  15:16:03  Show Profile
Does anybody know how to tighten the turning pivot on these motors? Presently it turns too easily for a motor that needs to push forward most of the time and I would like to snug it up a bit.

Thanks

Steve Krenz
`Elan
1978 SR/SK #482
Santa Fe, New Mexico



Edited by - on

tinob
Master Marine Consultant

Members Avatar

USA
1883 Posts

Response Posted - 08/27/2010 :  15:05:21  Show Profile
Steve,

It's been awhile but I seem to remember a spring loaded 7/16" bolt on the port side of the engine just below the powerhead.

Val on Calista #3936 Patchogue, N.Y.

Edited by - on
Go to Top of Page

redeye
Master Marine Consultant

Members Avatar

3476 Posts

Response Posted - 08/30/2010 :  06:19:52  Show Profile
This is how we did it in Alabama. The engine is still running.. (1974)
.


Edited by - on
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Topic Locked
 Printer Friendly
Jump To:
Association Forum © since 1999 Catalina Capri 25s International Association Go To Top Of Page
Powered By: Snitz Forums 2000 Version 3.4.06
Notice: The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.