Notice:
The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.
Having done the service on our Nissan 9.9hp on the boat in the back yard on the trailer, I had to fire up the engine which meant pumping the priming bulb on the fuel line.
As I squeezed the bulb, I could feel the slight fuel leak squirt from the bottom of the bulb. Need a new one.
First attempt is the 'Universal' fuel hose replacement, but it has no end fittings. Not a problem as I can use the original end fittings.
However, I'm not sure the best method of securing the hose to the end fittings is by using a screw type hose clamp.
Notice: The advice given on this site is based upon individual or quoted experience, yours may differ. The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.