Catalina - Capri - 25s International Assocaition Logo(2006)  
Assn Members Area · Join
h.jpg Home.
a.jpg Association Forum
s.jpg Ships Store
c.jpg Cruising
r.jpg Racing
t.jpg Technical Tips
g.jpg Photo Gallery - New
o.jpg Boat Search - Updated
m.jpg Manuals & Brochures
3rdrpt.jpg Swap Meet
l.jpg Links
f.jpg Officer Flag Line & Staff
b.jpg Bylaws & Constitution
 
1.jpg Members Area
1.jpg Join the Association
 
Notice:
The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.
 
Association Forum
Association Forum
Home | Profile | Register | Active Topics | Forum Users | Search | FAQ
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 Catalina/Capri 25/250 Sailor's Forums
 Catalina 250 Specific Forum
 Are My Spreaders Installed Wrong?		  New Topic  Reply to Topic
 Printer Friendly
Author  Topic Next Topic  

crystal_blue
1st Mate

Member Avatar

USA
76 Posts
Initially Posted - 03/21/2026 :  14:12:35  Show Profile  Reply with Quote
As I mentioned in another thread, I currently have the mast off the boat for some maintenance. One of the oddities I've noticed as I look at things closely is . . . the spreaders don't seem to perfectly align with the (for lack of a better word) "stubs" of the spreaders that are bolted to the mast itself. See the following pics:

https://photos.app.goo.gl/FUsY1GLzGzSLJATm9
https://photos.app.goo.gl/pNpSGvuASrKdgXPQ7

Is everyone else's mast the same way? Or are my spreaders installed "backwards" somehow?

Thanks--
Jim and Crystal Smith
Lehi, Utah
1996 Catalina 250 WB #191 "Mariah"

OLarryR
Master Marine Consultant

Members Avatar

USA
3502 Posts
Response Posted - 03/21/2026 :  21:07:53  Show Profile  Visit OLarryR's Homepage  Reply with Quote
I have a Cat25, so not familiar with your spreaders. However, if you have not done so already, click on the link for "Manuals and Brochures" . Then click on the 250 manual (HTML version) and then click on the photo for "Spreader Assembly".

Note the spreader seems to be shaped like the wing of a plane with the surface that faces toward the forward/bow has a more curved shape compared to the spreader section that faces to the stern. - just like a plane's wing. If your spreader surfaces seem to have same spreader surfaces/configuration as shown in the manual , then it is okay.

From the sketch in the manual, it is hard to determine if the spreaders can only be installed one way - the proper way. If the bolt/pin hole in the spreader was closer to the forward edge or rear edge of the spreader, then there would be only one way to install the spreader because it would then be doubtful you could install it backwards. But from the drawing in the manual, that hole seems to be in the middle of the spreader......So I would study the drawing and the curvature of the forward edge versus the trailing edge to see if it matches your mast/spreader configuration.
Larry
'89 Robin's Nest#5820, Potomac River/Quantico, Va
http://catalina25.homestead.com/olarryr.html
Go to Top of Page
   Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
Association Forum © since 1999 Catalina Capri 25s International Association Go To Top Of Page
Powered By: Snitz Forums 2000 Version 3.4.06
Notice: The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.