Notice:
The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.
Due to some unfortunate issues, our 2000 C250WK has been in storage for the last 2 1/2 yrs. I've studied the few diagrams in the owners guide and still cannot be sure (remember) of how the lines should be running. In particular, there are two line clutches (a single on one side and a double on the other). I'm guessing that one is for the Jib Halyard and one is for the Main Halyard, but can't remember what the third one is for. Any one have a picture of their rigging that I could take a look at??
My lines may not be standard ... but it's sounds similar to yours. I have my jib halyard on the port side (single clutch). On the starboard side, I have the main halyard and the jiffy reefing line into a double clutch.
Notice: The advice given on this site is based upon individual or quoted experience, yours may differ. The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.