Catalina - Capri - 25s International Assocaition Logo(2006)  
Assn Members Area · Join
Association Forum
Association Forum
Home | Profile | Register | Active Topics | Forum Users | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 Catalina/Capri 25/250 Sailor's Forums
 Catalina 250 Specific Forum
 Mast raising tip - use a fender
 New Topic  Topic Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

britinusa
Web Editor

Member Avatar

USA
5404 Posts

Initially Posted - 01/28/2006 :  19:14:20  Show Profile  Visit britinusa's Homepage
Thought I should share this.
When we are moving the mast from the travel postion to the mast step, it gets awkward to move it about in order to get the bolt through the mast step and the base of the mast.
Now I put an 8" fender on the aft side of the mast step and lower the mast onto the fender. It acts like a shock absorber and makes inserting the through bolt easy. It also reduces the risk of scratching the cabin top aft of the mast step.


Joint Decision. (Sold)
PO C250WB 2005 Sail # 841.


Moved up to C34 Eximius

Updated August 2015

Edited by - on

Tom Potter
Master Marine Consultant

Members Avatar

USA
1913 Posts

Response Posted - 01/29/2006 :  15:18:49  Show Profile
Paul,
Thats a neat idea, I'll give that a try next time I haul out.

Edited by - on
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Topic Locked
 Printer Friendly
Jump To:
Association Forum © since 1999 Catalina Capri 25s International Association Go To Top Of Page
Powered By: Snitz Forums 2000 Version 3.4.06
Notice: The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.