Notice:
The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.
Have any of you added a bow roller for anchor use on the bow of your C250. I would be interested to see what size that you used, how you attached it, and in what position that you located it. Also any problem that arose on either installation or use. Do you "store" your anchor on it full time?
Hope you get some responses.... I know this has been done once by Davis Northnagel... and he posted pics to the forum though I'm not sure he ever did a tech tip.
Basically the mount consisted of a formed piece of stainless tubing which mounted above the rub rail on each side of bow with slugs under the lip much the way the chain plates are done on the water ballast models. Within the forward radius of the mount was a piece of hardwood.
I can't recall the roller he used, though it seems that it was from a vendor other than the marine stores.
I've wanted to do this project myself.... I prefer and often need to use the 16lb bruce clone anchor which is now stored in one of the cockpit lockers.
For those who trailer.... the mod might not work for those with the newer mast raising system as it might not clear the bow stop which raises.
I asked about this topic some time ago, And Arlyn pointed me to Davis, who has sold his 250. I e-mailed Davis about the installiation and he sent me a number of pictures. I submitted these to Mark for tech tips and I have not checked to see if they made it yet. If the pictures did not make it I think I still have them and I would be glad to pass them along to whomever. I decided not to install a roller I just stow my 22lb plow & rode in the V-birth settee.
Arlyn haven't read too much about your northern Great Lakes adventures (other than the anchor dragging). Have I missed (most of my free time has been spent on the water and not the forum this summer)any other discussions? Or haven't you shared this years cruise yet?
We ended up in the western Lake Erie Islands area and Cedar point. The Cmndr. didn't want to drive more than 4-5 hrs., so the northern lakes got ruled out for this year. We had a great time <img src=icon_smile_big.gif border=0 align=middle>(so great we plan on another trip there next summer) and found all the comments from Duane and others this spring, on the forum, very helpful and right on the mark. Our trip was uneventful except for getting to see firsthand how the 250 sailed and handled in winds and waves bigger than we usually get, I was impressed with the 250. I also found we had an awful lot of time between tacks, in fact I usually had to wake the crew for help with the sails. The lake we sail on is rather narrow so sail handling gennerly occurs with some frequency.
Notice: The advice given on this site is based upon individual or quoted experience, yours may differ. The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.