Notice:
The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.
I have a complete furling set up - the CDI Flexible Furler 2 (FF2) - that was purchased new in 2008 and used for two seasons on a Catalina 250 (on Lake Tahoe exclusively). I'm finding this online for about $500 (incl. tax and delivery.)
The luff has been trimmed down to 29'-2", so the maximum forestay would be 30'-2". This will probably work on any boat at about 25' LWL or smaller. This is the exact furler that Catalina uses on the C-22, so it would be perfect for that boat.
The furler is complete with the installation/operating instructions, the luff, drum assembly, halyard, 3/16" dia. furling line, etc. It's ready to be installed.
I'd prefer a delivery / pickup in the greater Reno / Tahoe / Sacramento area, but commercial shipping is a remote (and likely expensive) possibility. You can pick this up in Gardnerville, Nevada, or I'll deliver this to the greater Reno area for $25, to Sacramento for $50.
Questions? Contact Martin @ 775-783-9034
C25/250 Int'l Ass'n Member 2008 C-250 WK #973 "Bluebell" Lake Tahoe, CA/NV
Notice: The advice given on this site is based upon individual or quoted experience, yours may differ. The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.