Notice:
The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.
I acquired a Mark I last year from a boat that was being parted out - and there was no owner's manual.
I am having a problem getting the restraining washer to come off the two pins so I can screw the stemhead stud further into the tack swivel assembly. Any advice?
If anyone has an owner's manual they could scan to me - it would be greatly appreciated!
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by Kim Luckner</i> <br />You might try http://www.harken.com/pdf/Furling_QuickService_online.pdf
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">Thank you Kim, MKI it is . . . interesting that Harken starting shifting to plastic on the 2nd generation.
Notice: The advice given on this site is based upon individual or quoted experience, yours may differ. The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.