Notice:
The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.
Ok on my 84 C25 above the "head" compartment is what seems to be an opening for a vent that is leaking. Is this an opening to install a vent? and if so are there any recommendations as to what I should install.
Mornin Frank, I have a solar powered vent thereabouts. It's in the headspace between the head and the wash stand. Not leaking fortunately. What's covering the hole on your boat? Gotta be something seems to me. Val
On my opening there seems to be a plastic ring w/ a plug as I recall. In the Head area there was a teak ring.
By the way I may have an opening in my car next weekend to go down to atlantic city for the show. Are you interested? it would be saturday the 11 that we are going. Email me at frich1230@aol.com
Mornin Frank, I have a solar powered vent thereabouts. It's in the headspace between the head and the wash stand. Not leaking fortunately. What's covering the hole on your boat? Gotta be something seems to me. Val
<b>"...would you know what type of vent this is made for, is it a specific mfr, or can I install any type of solar vent?" - Frank</b>
I can't answer your question, but maybe you could contact Nicro or even call BoatUS for assistance. Measure your deckplate and see if one of these vents will fit. This is page 499 of the BoatUS catalog.
Notice: The advice given on this site is based upon individual or quoted experience, yours may differ. The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.