Notice:
The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.
Hi Nancy, Re your motormount problems: I have an 8hp on an old wornout mount. The springs are pretty much bent or shot. To give the mount a little extra uummmmph I added a couple of hardware store springs on each side. You may need to experiment to
"I'm planning my season's upgrades and have a few questions. ...
"2. My mast is down and I need to install a windex and a masthead light. This is really a basic question. Where does the wire go and how does it get to my elect
Hi Nancy, I rewired my boat's mast last winter. I found it had a length of pvc in it, pop riveted to the inside front of the mast, to put the wires in.
Notice: The advice given on this site is based upon individual or quoted experience, yours may differ. The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.