Association Forum - 5hp Briggs & Stratton Outboard....

Assn Members Area · Join

Home.

Association Forum

Ships Store

Cruising

Racing

Technical Tips

Photo Gallery - New

Boat Search - Updated

Manuals & Brochures

Swap Meet

Links

Officer Flag Line & Staff

Bylaws & Constitution

Members Area

Join the Association

Notice:
The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.

Association Forum

Username:	Password:
Save Password
Forgot your Password?

All Forums

Catalina/Capri 25/250 Sailor's Forums

General Sailing Forum

5hp Briggs & Stratton Outboard....

New Topic

Topic Locked

Printer Friendly

Author

Topic

ClamBeach
Master Marine Consultant

Member Avatar

3072 Posts

Initially Posted - 06/10/2003 : 20:49:43

Anyone else look at that little pup yet ?
(just google on briggs & stratton outboard)

Now... If they'd make an 8hp with 25" shaft.

Currently maintaining two holes in the water...'77 Venture 23 and new to the family,
'78 Catalina 25

Edited by - on

dlucier
Master Marine Consultant

Members Avatar

Virgin Islands (United Kingdom)
7583 Posts

Response Posted - 06/10/2003 : 21:06:37

A week or two ago, in one of the newspapers I work for, the outdoors writer ran an article/review of the new Briggs & Stratton motor. Here it is...

An outboard engine made for low speeds

May 29, 2003

BY ERIC SHARP
FREE PRESS OUTDOORS WRITER

MANISTEE -- We automatically associate some words with others each time we hear them. "IBM" with "computers." "Xerox" with "copying machines." "Enron" with "thieves."

Then there are "Briggs & Stratton" and "small engines," which pair up like bread and butter. Briggs & Stratton builds an amazing 70 percent of the air-cooled engines used in this country on everything from lawn mowers to go-karts.

Something I've wondered for a long time is why B&S didn't build small outboards for boats. Wonder no more. The company has introduced a five-horsepower, four-cycle, air-cooled outboard that sells for $700 and is aimed at first-time boat-buyers and people who want a second small boat for puttering about on inland lakes and streams.

Let's establish right off what this engine is not. It's not for people who want to go fast. No five-horse engine can drive a light boat with the average-size adult male in it at more than about 15 m.p.h., and then only with a well-designed hull.

It's not for those seeking the touted quiet of a four-cycle engine from manufacturers like Yamaha and Mercury. Those engines are water-cooled with underwater exhausts, which means they can be shrouded inside a metal cowling stuffed with acoustic insulation. But they also cost $400 to $500 more than the Briggs & Stratton.

The Briggs & Stratton engine is an excellent buy for someone who doesn't want to spend much money, isn't into speed and will run the boat on protected waters.

The engine has forward, neutral and reverse gears and an above-water exhaust. That means the cowling has to be open on the bottom, and it's definitely noisier than a water-cooled outboard. But it's quieter than a lawn mower.

The 56-pound engine holds 24 ounces of oil, which Bill Withorn, a Briggs & Stratton sales representative, said is good for about 30 hours of use. Phil Mindala, another B&S area sales rep, said the engine burns a maximum of a half-gallon of fuel an hour, giving boaters about six hours of endurance from the three-gallon auxiliary tank that comes with it. That's a full day of operation for most people. To make things more attractive, B&S has teamed up with two boat builders to offer three boat, trailer and engine packages that run $2,000 to $2,600.

I ran two of the boats on the Manistee River, a 12-foot aluminum V-hull that weighs about 110 pounds and an 11-foot-3 plastic bass boat that weighs about 210. Riding alone in the aluminum boat from Myers Boat Co. of Adrian, I managed an average top speed of 13.4 m.p.h. The little bass boat did 11.7 m.p.h. With a total load of 500 pounds in the aluminum boat, we still did about 10 m.p.h.

The bass boat from KL Industries of Muskegon was surprisingly well-planned, with two under-seat storage areas aft (one a live well) and three smaller compartments under the foredeck (one a bait well). It's a rig you can pull behind the smallest car and launch anywhere from a concrete ramp to a grassy beach. It's so light that two anglers could unhitch the trailer and launch the boat by hand in places a car or truck couldn't go.

The B&S engine has an 18-inch shaft that will make it attractive to the owners of small sailboats looking for a cheap auxiliary. The three-gallon tank will take an 18- to 22-foot sailboat 50 miles or more at 5-6 knots.

<img src="http://www.catalina25-250.org/c25sm.gif" border=0>Don Lucier<img src="http://www.catalina25-250.org/c25sm.gif" border=0>
<img src="http://im1.shutterfly.com/procserv/47b2d904b3127cce9f7cd9ffdf1d0000003010" border=0>
North Star SR/FK

Edited by - on

Dave B
Admiral

Members Avatar

Mali
863 Posts

Response Posted - 06/10/2003 : 21:19:00

<BLOCKQUOTE id=quote>quote:<hr height=1 noshade id=quote>
Anyone else look at that little pup yet ?
<hr height=1 noshade id=quote></BLOCKQUOTE id=quote>
Note: Fresh water only.

Dave Bristle, 1985 C-25 #5032 "Passage" SR/FK/Dinette/Honda in SW CT

Edited by - on

lcharlot
Master Marine Consultant

Members Avatar

Antigua and Barbuda
1301 Posts

Response Posted - 06/12/2003 : 00:51:13

<BLOCKQUOTE id=quote>quote:<hr height=1 noshade id=quote>
Anyone else look at that little pup yet ?
(just google on briggs & stratton outboard)

Now... If they'd make an 8hp with 25" shaft.

Currently maintaining two holes in the water...'77 Venture 23 and new to the family,
'78 Catalina 25
<hr height=1 noshade id=quote></BLOCKQUOTE id=quote>

One of the Catalina 22's in Fleet 4 has a B&S, just purchased at the beginning of the season. It is VERY loud compared to the Honda's and Yamaha's that most of our members have. The shaft is barely long enough for a Catalina 22, and would be less than adequate on most Catalina 25 motor mounts even at the lowest position. Advantages: half the weight of a Honda 10, no water pump impeller or timing belt to fail, half the retail price of most other 5 and 6 hp 4-stroke outboards. Serious disadvange: Not really "marinized" so you can only run it in fresh water. Being basically a lawn-mower engine with (I assume) a non-pressurized "splash" lubrication system, I doubt that it would last as long as the average Honda, of which we have many in our club with 20+ years of trouble-free service.

Larry Charlot
Catalina 25 #1205 "Quiet Time"
Sacramento, CA

Edited by - on

Dave B
Admiral

Members Avatar

Mali
863 Posts

Response Posted - 06/12/2003 : 21:14:17

<BLOCKQUOTE id=quote>quote:<hr height=1 noshade id=quote>
...Serious disadvange: Not really "marinized" so you can only run it in fresh water. Being basically a lawn-mower engine with (I assume) a non-pressurized "splash" lubrication system, I doubt that it would last as long as the average Honda, of which we have many in our club with 20+ years of trouble-free service.
<hr height=1 noshade id=quote></BLOCKQUOTE id=quote>
First, I'm glad to hear the testimonial for Hondas after some of the problems that have been posted...

Secondly, while I've been aware that the BS outboard is not engineered for salt water, I will give a testimonial that I've run two BS lawnmowers for over 20 years each, with probably 4-6 oil changes between them. Call me what you will... But in each case, I replaced the mower because something like the deck had rusted out from underneath the engine. The BS engines still started on one pull. Briggs has some secret!

Now, do I want a Briggs lawnmower engine running next to my ear on our boat? Uhhhhhh.... I think not.

Dave Bristle, 1985 C-25 #5032 "Passage" SR/FK/Dinette/Honda in SW CT

Edited by - on

Topic

New Topic

Topic Locked

Printer Friendly

Jump To:

Association Forum

Notice: The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.