Catalina - Capri - 25s International Assocaition Logo(2006)  
Assn Members Area · Join
Association Forum
Association Forum
Home | Profile | Register | Active Topics | Forum Users | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 Catalina/Capri 25/250 Sailor's Forums
 General Sailing Forum
 Ablative Paint. Practical Sailor? Copper Content?
 New Topic  Topic Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

albert
Captain

Member Avatar

USA
262 Posts

Initially Posted - 07/19/2004 :  00:18:20  Show Profile  Visit albert's Homepage
I'm getting ready to repaint the hull bottom on Abacus. Abacus is in the Florida Keys in the water year round. Tons of slime in the area.

I'm looking at the following paints:
--West Marine brand PCA with Irgarol 30% copper $140/gallon
--Pettit Ultima SR with Ciba Irgarol 60% copper $180/gallon
--Interlux Micron Extra with Biolux 39% copper $185/gallon

Is the high copper content that important on an ablative?

Has anyone read the latest practical Sailor review of bottom paints? What was the best performing ablative paint WITH slime blockers.


Albert Iturrey
al@comhertz.com
Abacus 1984 C25 #4679

Edited by - on

Brooke Willson
Admiral

Members Avatar

USA
983 Posts

Response Posted - 07/19/2004 :  08:08:37  Show Profile
I've been really happy with Trinidad SR. That's not an ablative paint, of course, but here in the Chesapeake it keeps the slime off.

Brooke

Edited by - on
Go to Top of Page

Leon Sisson
Master Marine Consultant

Members Avatar

USA
1893 Posts

Response Posted - 07/19/2004 :  19:21:03  Show Profile  Visit Leon Sisson's Homepage
Albert,

I'm also on the Florida coast, near Port Canaveral. I'm an avid follower of Practical Sailor, and have had excellent results from Interlux Micron Extra with Biolux. With three coats (including indicator coat), I can go two years between haulouts. Just a month or two ago, I dove to see how the year and a half old paint was doing, and to scrape any hard growth. Other than a very few small barnacles near the waterline and at scrapes in the paint, there was only a very thin smooth layer of slime, and no indicator color showing. I didn't even bother to finish wiping the bottom, it was so clean.

-- Leon Sisson

Edited by - on
Go to Top of Page

ddlyle
Captain

Members Avatar

302 Posts

Response Posted - 07/20/2004 :  00:40:46  Show Profile  Visit ddlyle's Homepage
A lot depends on the water in your marina.
There are marinas in my area with very little water flow.
And with the fuel dock's (illegal) spills, the marine life stays away.
So bottoms stay clean in those places.
If I could afford to keep my boat there I would because it is a nice marina. (Harbor Town in Hilton Head is one such.)
And the marina I CAN afford is on a fast moving creek with very clean water. (salt water marshes all around)
I thought at first the flow would keep the slime off (like sailing).
But actually the current just force-feeds the organisms that like to grown on my bottom (and the bottoms of boats around me).
Healthy salt marshes and currents of nutrient-rich water make for fuzzy bottoms.
I used Trinidad SR.
If you're not averse to swimming with mask and fins, get used to diving with a scraper and brush.

Edited by - on
Go to Top of Page

albert
Captain

Members Avatar

USA
262 Posts

Response Posted - 07/23/2004 :  19:31:20  Show Profile  Visit albert's Homepage
Thanks. I think I'll go with Interlux Micron Extra.

Edited by - on
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Topic Locked
 Printer Friendly
Jump To:
Association Forum © since 1999 Catalina Capri 25s International Association Go To Top Of Page
Powered By: Snitz Forums 2000 Version 3.4.06
Notice: The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.