Notice:
The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.
I have read most previous posts regarding PoliGlow and I still have one question. On the PoliGlow bottle it says it may damage bottom paint. I am in the process of painting the bottom of my boat and after I would like to apply PoliGlow to the hull above the water line. Has anyone had a problem with PoliGlow damaging bottom paint?
Mark Britton Huntington, NY '82 C25 FK/SR #3202 "Good News"
It goes on very thin and should not run during the application. You could always tape the top edge of the bottom paint to get a nice edge. I suspect it would damage the bottom paint because it seals and would not allow the paint to do it's thing.
Just remember that the hull must be really clean for it to work as advertised. So if you have any dirt on your cleaning rag, get a new one. I used 24 white shop towels when I did my C25 and it turned out great. So don't clean the dirt off of one spot and move it to another with a dirty rag. Poliglow will seal the dirt in and make the hull look dull in that area. Lots of work, but if you take your time, I am sure it will turn out beautiful and you will be very pleased with the results.
So I am ready to admit it? After reading that Polyglow is probably a more expensive version of :"Mop and Glow", I tried it. I will wait a bit to reveal results, but I just wonder if anyone else is willing to admit that he or she tried it? Your evaluation?
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by Gary B.</i> <br />...but I just wonder if anyone else is willing to admit that he or she tried it? Your evaluation? <hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote"> Tried Mop 'n Glow? I would be very suspicious that it is missing some UV protection and could therefore turn yellow, or worse. On the other hand, there are some auto acrylics out there that might be about the same stuff for fewer $$. Did Practical Sailor test Mop 'n Glow? They're supposed to be interested in "practical" stuff...
It put on a nice shine after a few coats, and after 3 months or so, no yellowing.....yet. I am not sure I will do it again, as it seems to "ball up" just a touch where the fenders rub on the hull. I figured that the worst that could happen was that I would have to rub it all off and go with something else. When she comes home at the end of the season, I will re-evaluate. My friends in Fleet 94 have given me no end of grief about it! But, hey, if it works...the price is right.
I have NO ideas if Practical Sailor ever tried the stuff. They are too spendy for me....and it seems like they test things often that I just do not buy much.......My boat is so loaded, there is not that much I need any more.....
Notice: The advice given on this site is based upon individual or quoted experience, yours may differ. The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.