Notice:
The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.
Got all the clevis pins with the small cotter pin holes changed out to the ones with the bigger cotter pin holes. So I can use the cotter pins shown to the right. The old clevis pins to the left. And only one more turnbuckle screw to change out. Bent like the one shown above.
The little cotter pins ( or cotter rings ) were a pain to work with. Just too dang small...
Ray in Atlanta, Ga. "Lee Key" '84 Catalina 25 Standard Rig / Fin Keel
When I had my Hobie 17 I noticed that Hobie has monogrammed clevis pins with the flying H on the head, ever since I have thought someone should machine some custom pins for Catalina owners... just 'cause. No one would know you had them but you, but that is all that matters.
Notice: The advice given on this site is based upon individual or quoted experience, yours may differ. The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.