Association Forum - Mainsheet correction

Assn Members Area · Join

Home.

Association Forum

Ships Store

Cruising

Racing

Technical Tips

Photo Gallery - New

Boat Search - Updated

Manuals & Brochures

Swap Meet

Links

Officer Flag Line & Staff

Bylaws & Constitution

Members Area

Join the Association

Notice:
The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.

Association Forum

Username:	Password:
Save Password
Forgot your Password?

All Forums

Catalina/Capri 25/250 Sailor's Forums

General Sailing Forum

Mainsheet correction

New Topic

Topic Locked

Printer Friendly

Author

Topic

Frank Hopper
Past Commodore

Member Avatar

Pitcairn Island
6776 Posts

Initially Posted - 02/10/2006 : 13:14:31

People shopuld be receiving the February Mainsheet over the next few days.
The Editor of the Mainsheet put "25-250" after my masthead in the Technical Section . I am not the technical editor of the 250.

Edited by - on

Champipple
Master Marine Consultant

Members Avatar

USA
6855 Posts

Response Posted - 02/10/2006 : 20:24:02

Also - the tech tips referenced in Franks article are located on the main page of the tech tips.

Edited by - on

John G-
Admiral

Members Avatar

793 Posts

Response Posted - 02/10/2006 : 20:43:56

<blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by fhopper@mac.com
 People shopuld be receiving the February Mainsheet over the next few days.
The Editor of the Mainsheet put "25-250" after my masthead in the Technical Section . I am not the technical editor of the 250.
<hr height="1" noshade id="quote"></blockquote id="quote">

 
That would be the editor and publisher of the entire magazine Jim Holder.
I assume the confusion is that there was only a single Tech Tip instead of one from both the C25 editor (Frank) and one the from the C250 editor (Arlyn). I do not know if Arlyn submitted an article and there wasn't enough room but we are, or were, the C25/C250 National Association, so if a tech tip showed up at all, the publisher was obligated to put it under the C25/C250 heading.
I suggest that both editors communicate and make sure that they are both submitting articles and that the Mainsheet has the room for both articles. Then inform the publisher what our association is submitting. I think that Jim will do everything he can to see that we get our articles published and that the correct attributions are applied.
Jim has been most gracious in getting most if not all of our articles in the magazine but we need to be aware of his space limitations.

Edited by - John G- on 02/10/2006 20:55:09

Arlyn Stewart
Master Marine Consultant

Members Avatar

USA
2980 Posts

Response Posted - 02/11/2006 : 06:46:44

I'm guessing what has happened is that I was out of sync with the previous issue deadline and the article I submitted to the web site was accepted but missed a deadline. I figured it would then be used in the next issue, but evidently it was purged and two issues have been missed.

<blockquote id="quote">quote:<hr height="1" noshade id="quote"> We are now accepting content for the: Mainsheet May 01, 2006 Issue<hr height="1" noshade id="quote"></blockquote id="quote">

This statement would provide helpful information to the tech editors if it also included the deadline. What is the deadline for the above issue?

Edited by - on

John G-
Admiral

Members Avatar

793 Posts

Response Posted - 02/11/2006 : 09:20:38

<blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by Arlyn Stewart
 I'm guessing what has happened is that I was out of sync with the previous issue deadline and the article I submitted to the web site was accepted but missed a deadline. I figured it would then be used in the next issue, but evidently it was purged and two issues have been missed.

<blockquote id="quote">quote:<hr height="1" noshade id="quote"> We are now accepting content for the: Mainsheet May 01, 2006 Issue<hr height="1" noshade id="quote"></blockquote id="quote">

This statement would provide helpful information to the tech editors if it also included the deadline. What is the deadline for the above issue?
<hr height="1" noshade id="quote"></blockquote id="quote">
 
Arlyn,
Check with Jim Holder cv.jholder@mainsheet.net, but my deadlines have always been six weeks before publication.
March 15, June 15, Sept. 15 and Dec. 15. I think I heard from Frank that the tech tips have a deadline a few days earlier.
I ask all contributors to get copy to me by the first week of the month so I have time to edit.

Go ahead and click on the bird.

Edited by - on

Frank Hopper
Past Commodore

Members Avatar

Pitcairn Island
6776 Posts

Response Posted - 02/11/2006 : 19:39:19

Tech tips are due on the 11th.

Edited by - on

Arlyn Stewart
Master Marine Consultant

Members Avatar

USA
2980 Posts

Response Posted - 02/12/2006 : 05:27:50

Thanks to both John and Frank...

Edited by - on

AADIVER
Admiral

Members Avatar

USA
966 Posts

Response Posted - 02/12/2006 : 22:18:53

How do I get the current and past issues of Mainsheet?

Edited by - on

John G-
Admiral

Members Avatar

793 Posts

Response Posted - 02/13/2006 : 08:41:38

<blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by FARMHAND
 How do I get the current and past issues of Mainsheet?
<hr height="1" noshade id="quote"></blockquote id="quote">

 
Are you a [url="http://catalina-capri-25s.org/membership_registration.htm"]member [/url] of the Association?
The Mainsheet comes to all paid [url="http://catalina-capri-25s.org/membership_registration.htm"]members. [/url]

Underlined words are a HOT link.

Go ahead and click on the bird.

Edited by - on

Fantasy II
1st Mate

Members Avatar

USA
80 Posts

Response Posted - 02/13/2006 : 16:22:18

I paid my dues, but STILL not on the "Owners" list. I hope that I get the Mainsheet anyway ????

Edited by - on

Topic

New Topic

Topic Locked

Printer Friendly

Jump To:

Association Forum

Notice: The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.