Notice:
The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.
On my new 250, on the starboard side, a foot or so from where the rear starboard shroud connects to the boat (right by the outboard motor) it rubs and touches against the chrome tubing that holds the outer seat/chair up.
On the port side that shroud is probably about one inch away from the tubing.
This doesn't seem right to me?
Is this normal and if not, what is probably wrong.
I measured both shrouds and they seem to be the same length.
Notice: The advice given on this site is based upon individual or quoted experience, yours may differ. The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.