Notice:
The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.
I have 2 gaps at either side of the very top of the top hatch board. These can't be water tight is ther any thing to do to close them? They are roughly .5 to .75 inch square.
Thanks,
Pete Hagar Dayton,Ohio Indian Lake 2770 82/SR/SK/9.9 evinrude
As far as I know all C-25s have those gaps. Not only do they let a little water in during a driving rain, bees and wasps love to enter the cabin through them. I've thought about adding a small piece of rubber to the back of the top corners of the uppermost hatch board that would extend past the edge of the board and seal against the hatch jamb and the sliding hatch cover, but I haven't tried it yet. In the mean time, I've been stuffing small pieces of rag in the holes when I lay the boat up over the winter.
Notice: The advice given on this site is based upon individual or quoted experience, yours may differ. The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.