Catalina - Capri - 25s International Assocaition Logo(2006)  
Assn Members Area · Join
Association Forum
Association Forum
Home | Profile | Register | Active Topics | Forum Users | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 Catalina/Capri 25/250 Sailor's Forums
 Catalina 250 Specific Forum
 Catalina Service ??
 New Topic  Topic Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

kirkh
Deckhand

Member Avatar

USA
17 Posts

Initially Posted - 10/14/2002 :  20:43:57  Show Profile
This week, I'm purchasing a 250WK, hull #490. One of the lower shrouds needs to be replaced so I called Catalina to order one. I don't seem to be able to get a phone response or an e-mail response when I've tried to place an order. I finally got a hold of someone and I e-mailed them my order and asked them to just REPLY so I know the order was received. Didn't hear anything....Called again and left message...Didn't hear anything...

I'm taking the mast down to move it so I wanted to replace it at that time. My questions are this: Is this typical response for Catalina? and Does anyone have any suggestions on dealing with them? I tried CatalinaDirect but they needed the actual length of the shroud and I couldn't provide it to them since the boat is out of town.

I've sailed a 250 quite a few times and love it and I really like this forum (it even helped me make my decision on the 250) but I sure hope I can get service/parts when needed. Otherwise, I may be disappointed I didn't by that com-paq 23-3.

Thanks,
Kirk




Edited by - on

Tray
Navigator

Members Avatar

Namibia
224 Posts

Response Posted - 10/15/2002 :  05:30:04  Show Profile
Kirk,

I have never received a response to any email; however, I have had no trouble calling. Here is the number I call, 800-654-2914. Somebody always answers, and I usually get the help I need. I think they could be more responsive to their customers' concerns, and probably are for the big boat owners.

I have had excellent service from my dealer. Try finding a good one in your area. It might be better than calling the factory directly.

Tray
C-250WB #554
"Weeny Bean"

Edited by - on
Go to Top of Page

Arlyn Stewart
Master Marine Consultant

Members Avatar

USA
2984 Posts

Response Posted - 10/15/2002 :  09:52:21  Show Profile
Kirk, Frank Butler hates email.... it will not get immediate response when ordering. Catalina's preferred method of ordering parts is to fax, the phone is next best.

Arlyn C-250 W/B #224

Edited by - on
Go to Top of Page

bdehuff
1st Mate

Members Avatar

USA
41 Posts

Response Posted - 10/16/2002 :  19:01:38  Show Profile
Yeah,

Knock, knock, is anyone home at Catalina?

A better(faster)response to an order may be obtained by contacting "Catalina Direct," the Catalina dealer in Sacramento, CA (800)959-7245. If they don't have parts on hand, they can usually get them fairly quickly.

I have not had much luck contacting Catalina's factory via email. They once had a good customer service representative (David Graas) at Catalina@Catalina.net. He was good about responding to email. However, that email address does not seem to work any longer, so maybe he is not there anymore.

I recently sent an inquiry Catalina using their website form ("Contact Us") about a week ago. No response. However, they have always been slow in responding to email. Usually takes at least couple weeks.

IMHO here is really no excuse for non-response to an inquiry using the on-line contact form provided by a company right in their own website. If they are not going to respond they should get rid of it. If Frank Butler hates e-mail, maybe Gerry Douglas (VP) or Sharon Day (Sales Mgr.) don't, and they might respond if they are still at Catalina.


Edited by - on
Go to Top of Page

dlucier
Master Marine Consultant

Members Avatar

Virgin Islands (United Kingdom)
7583 Posts

Response Posted - 10/16/2002 :  20:01:01  Show Profile
Maybe the Catalina Yacht company is like Ford, GM, Honda,...etc, in that they are a manufacturer that relies on a dealer network to provide sales, parts, and service. I don't know how many boats that Catalina has manufactured over the years(many thousands?), but do you think they are equipped to handle every question from every Catalina boatowner? Imagine if the factory was inundated with questions like those posted here at this forum and at other Catalina website forums. They would need a customer service department that would rival Microsoft's. Catalina Direct, the California Catalina dealer and defacto Catalina specialist, carries most of the parts available for our boats and they told me that they sell these parts at roughly the same price as the factory. Last spring when I inquired about a new rudder, they informed me that their price had just went down because the Catalina factory price had been reduced.

So if you can't find what you are looking for at Catalina Yachts, you might want to contact a local dealer or CD.

Don Lucier, 'North Star'
1980 C25 #2151
SR/FK

Edited by - on
Go to Top of Page

bren737
Captain

Members Avatar

291 Posts

Response Posted - 10/17/2002 :  02:03:35  Show Profile
Blair,

David is indeed still at Catalina; just spoke to him this afternoon. He's now in "250 technical support". You're right, email seems to be slow at best and I don't think "tech support" is really for simply ordering parts. However, whenever I have had a true technical question on my boat I have called David and if I had to leave a voice mail he responded within a couple of hours. If he didn't know the answer, he dug around and promptly called me back. It seems to be a matter of being overwhelmed with phone calls at times. He stays pretty busy. Also, Catalina does in fact keep records on every boat they've built. They can go back and get every detail about it's contstruction, including part numbers used, etc.

I think your assessment is correct: for run-of-the-mill parts orders, go to a dealer or Catalina Direct. I wouldn't hesitate to call with any real head-scratching questions, though.<img src=icon_smile.gif border=0 align=middle>

Bren Peterson
C250WB, #642, "Ruah"
San Antonio, TX

Edited by - on
Go to Top of Page

BJ Wagner
1st Mate

Members Avatar

USA
50 Posts

Response Posted - 10/17/2002 :  10:34:27  Show Profile
Catalina may not the most responsive company out there, but Bren is right when you really need them they are there.

When we purchased our C-250 a year ago we found that the original dealer had made an error on the hull I.D. number and for the previous three years the registration paperwork and actual I.D. were different.

After finding out that the orginal dealer was no longer in business I contacted David at Catalina and he worked for several days doing what was necessary to resolve the problem, even though it was not a mistake that Catalina had made.







Brad Wagner
C-250 Wing Keel #361
Lake Pleasant, AZ

Edited by - on
Go to Top of Page

bdehuff
1st Mate

Members Avatar

USA
41 Posts

Response Posted - 10/17/2002 :  14:30:38  Show Profile
Despite a rather interesting comparison which has drawn between Catalina Yachts and large automobile manufacturing companies, there is absolutely no similarity between Catalina Yachts and GM or Honda. A production boat manufacturer is not at all like a gigantic automobile company, which "stamps out" hundreds of thousands of units of every model every year. Although the boats constructed by Catalina are made in sort of an "assembly line" type process, all boats made by production boat manufacturers are really more or less hand made, rather than being stamped out in a production line.

Many questions cannot be directed to a dealer because he would not have the answer. As has been aptly pointed out, Catalina keeps detailed records on every hull they produce. Yes, I think Catalina should have the answers to every question, and should be expected to provide reasonably timely responses to their customers. It seems that e-mail is not the best way to contact Catalina since they are usually slow to respond. If there is still someone like David Graas answering the telephone in Woodland Hills, that's the way to go. (Sorry David, for all the extra call you're going to get).

This forum is a tremendous help when you can't get a fast answer any other way. So, here is the question I sent to Catalina: "How can I establish a ground for my Autopilot which is seperate from the boat's electrical grounding system, since connection to my C250's grounding system currently interfers with operation of the autopilot when the diesel engine is running. I have eliminated all other sources of interferance, including the alternator as a possible source of interferance." My configuration of C250 is somewhat different from many others insofar as I have an inboard diesel. The wiring diagram which came with my boat is totally inaccurate.

Anyone have any ideas?

Blair Dehuff
Hull#427


Edited by - on
Go to Top of Page

bdehuff
1st Mate

Members Avatar

USA
41 Posts

Response Posted - 10/17/2002 :  18:37:21  Show Profile
Bren and Brad,

You are correct that phoning David Graas is still the very best way to contact Catalina's factory for a fast response. As you suggested, I telephoned David today and he responded within less than two hours with a recommendation. After discussing the probelm with his shop personnel and Gerry Douglas, their recommendation was to run a seperate ground wire directly from the affected system (in this case an autopilot)to the negative terminal on one of the batteries, preferably the battery not used for starting.

Forget about e-mail.


Edited by - on
Go to Top of Page

dlucier
Master Marine Consultant

Members Avatar

Virgin Islands (United Kingdom)
7583 Posts

Response Posted - 10/18/2002 :  00:12:32  Show Profile
<b>" Despite a rather interesting comparison which was drawn between Catalina Yachts and large automobile manufacturing companies, there is absolutely no similarity between Catalina Yachts and GM or Honda. A production boat manufacturer is not at all like a gigantic automobile company, which "stamps out" hundreds of thousands of units of every model every year. Although the boats constructed by Catalina are made in sort of an "assembly line" type process, all boats made by production boat manufacturers are really more or less hand made, rather than being stamped out in a production line." - Blair Dehuff</b>


Blair,

I think I'm missing something here. Where, in my one-sentence auto analogy, did I ever compare the manufacturing techniques of Catalina Yachts to that of the “gigantic” automobile companies? <img src=icon_smile_question.gif border=0 align=middle>

What I did say was,

"Maybe the Catalina Yacht company is like Ford, GM, Honda,...etc, in that they are a manufacturer that relies on a dealer network to provide sales, parts, and service."

As you can see, this statement is comparing the factory/dealer customer service relationship and NOT the “assembly line type process” of Catalina Yachts and GM or Honda, which “stamps out hundreds of thousands of units”!


Don Lucier, Wildly Ecstatic with 'North Star'
1980 C25 #2151
SR/FK

Edited by - on
Go to Top of Page

bdehuff
1st Mate

Members Avatar

USA
41 Posts

Response Posted - 10/18/2002 :  17:40:25  Show Profile
Don,

Sorry Mate. I'll walk the plank. I missed your analogy.

Yes, Catalina, GM and Honda all have "dealers." And, I'm still not quite sure how this relates to the level of service Catalina owners should expect from the factory, which I believe was the subject of the thread ("Catalina Service").

Although Catalina markets their boats through dealers, we should still expect prompt service and good answers direct from the factory (which I have had lately). They have the hull records and the expertise. I've found the factory is more knowledgable than a dealer.

If you have a problem with your car - well, you are pretty much stuck with dealing with the "dealer."

Blair Dehuff
WK #427




Edited by - on
Go to Top of Page

dlucier
Master Marine Consultant

Members Avatar

Virgin Islands (United Kingdom)
7583 Posts

Response Posted - 10/18/2002 :  19:02:53  Show Profile
No problem, Mate! <img src=icon_smile.gif border=0 align=middle>

Don Lucier, 'North Star'
1980 C25 #2151
SR/FK

Edited by - on
Go to Top of Page

kirkh
Deckhand

Members Avatar

USA
17 Posts

Response Posted - 10/21/2002 :  19:09:21  Show Profile
Update - I did receive my shrouds! So I thank them for that. The only problem was they were about 18-20 inches too long so now I have to get them shortened. I figure they were for a tall rig versus my standard. Now that I have the boat and specs, I'll try Catalina Direct for future needs.

Based upon everyones' comments, I'm glad to hear that they'll be there if I really need some help.

Thanks for your comments,

Kirk
Now officially an owner of 250WK #490


Edited by - on
Go to Top of Page

Arlyn Stewart
Master Marine Consultant

Members Avatar

USA
2984 Posts

Response Posted - 10/23/2002 :  12:40:10  Show Profile
Blair, Yes, follow Catalina's suggestion to provide a ground directly to the battery first. If this doesn't solve the problem.

Noise spikes made from some metal to metal contact in your diesel may be present at the plus terminal of your auto pilot and internal filtering of the pilot inadequate for the intensity. Noise can be filtered from a voltage supply. Do so as close to the device as possible. I would suggest trying it across the + and - terminals of the pilot. Add bypass filters. I would start with a .05 mfd capacitor. Stubborn cases may need additional... try other values perhaps a .005 and a .1, having several values wont hurt.

Noise produced by an alternator for example can also be filtered at the output in the same way... Knocking the spikes down at the offending point and filtering the residue at the device is a good game plan.

The motor casting should definately be grounded directly to the battery negative terminal as well. This may be in the form of a jumper between the casting and the negative wire to the alternator/starter



Arlyn C-250 W/B #224

Edited by - on
Go to Top of Page

bdehuff
1st Mate

Members Avatar

USA
41 Posts

Response Posted - 10/29/2002 :  17:36:30  Show Profile
Arlyn,

Thanks for the suggestions, which I will try next Spring as I am through for the year (unfortunately).

What are "bypass filters", and where do you buy them?

Thanks again.

Blair Dehuff 250WK #427


Edited by - on
Go to Top of Page

Arlyn Stewart
Master Marine Consultant

Members Avatar

USA
2984 Posts

Response Posted - 10/29/2002 :  18:58:50  Show Profile
Blair, a bypass filter is composed of a simple ceramic capacitor across the + and - terminals. The capacitor will not conduct dc votage but will filter noise from a circuit. Available at Radio Shack.

Arlyn C-250 W/B #224

Edited by - on
Go to Top of Page

bdehuff
1st Mate

Members Avatar

USA
41 Posts

Response Posted - 11/02/2002 :  11:34:48  Show Profile
Arlyn,

Thanks again, I'll check it out.

Blair 250 WK #427


Edited by - on
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Topic Locked
 Printer Friendly
Jump To:
Association Forum © since 1999 Catalina Capri 25s International Association Go To Top Of Page
Powered By: Snitz Forums 2000 Version 3.4.06
Notice: The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.