Notice:
The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by Prospector</i> <br />If this were me, I would:
1. Try to break teh seal with a putty knife. 2. If the part lifted at all, I would inject some paint stripper into the space to try and get teh caulking to let go (Lee Valley Paint stripper will eat away 4200 quite nicely) 3. Give a squirt of WD-40 to teh bushings and have at 'em with the hammer again.
And if all that didn't work, buy a container of gelcoat from CD before taking a<b> BFH</b> to the part to get it out of the deck.
Notice: The advice given on this site is based upon individual or quoted experience, yours may differ. The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.