Notice:
The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.
I made a post of how I did the battery move a while back. I will see if I can find it. #6 wire is too small. Do you have electric start on your outboard? That makes a difference on the wire size.
Here is the link you want to read. It gives you a way to calculate wire size and how to route the wires.
For those who are reading this, this is some of the words I found when I went with the links:
"...Ran the wire down the starboard seat locker to under the galley sink ( the floor around the trash can comes out)fished them to the bildge in the main floor then to the small storage in the aft berth.Then we ran them to the closet behind the head down the open aft storage area on the port side to the area behind the aft sleeping area reconnected the wires and strapped the batteries down in their new location. You will have to drill holes in the closet floor, in the small aft storage under the cushions and under the sink. The pulling of the wires and hooking everything back up took about 6 hours. Of course that is on sailors standard time. Nothing gets done fast at the relaxing marina."
Notice: The advice given on this site is based upon individual or quoted experience, yours may differ. The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.