Notice:
The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.
My boat came to me pretty much fully loaded, but like Davy J, the autopilot I installed 10 years ago was by far, the best addition I've ever made. Even better than the bimini. As the vast majority of my sailing is done singlehandedly, the autopilot is set up even before I start the outboard when leaving the dock.
I haven't had time to do any "mods" yet as I've been spending time fixing things...but by far the best thing I've done is fix up the DC power system. Replacing those 2 mismatched, half dead car batteries and trickle charger with 2 group 27 marine deep cycles and Guest multistage charger has been the best bang for buck fix/mod. Having a strong, reliable base and bank of DC power has allowed new LED cabin lights, new fans, nav lights, radio operation....you name it.
Anchor Roller New 8" SS Mooring Cleats CDI Roller Furling & furling gear New running rigging Onboard a-frame to lower mast Reefing hook & Reefing Line Cabin Top halyard winch & Spinlock line stopper Winchers on sheet winches Bimini Tohatsu 9.8 hp 4-stroke Simrad Autopilot Larger Gas tank Rebuild sink faucets New marine head V-berth storage drawers Replace keel winch and cable 80 watt Solar panel & charge controller New Batteries (twice) Whisker pole & mast track Full size air bed in cabin Engel 125/12v fridge freezer New windows and portlights Asymmetric Spinnaker New Mainsail New 135% RF Genoa
It has occurred to me that once I replace the standing rigging, lifelines, rudder, tiller, and companion way hatch boards that I will have almost totally rebuilt the boat.
The single most important upgrade I did soon after buying my boat over 4 1/2 years ago. I replaced the finicky outboard with at that time, a new 2006 Honda 9.9 XLS. That outboard runs flawlessly. I consider the outboard most important because it would be a necessity to leave and then return and get into my marina.
Replacing the non-working depth finder with a fishfinder would be my next most important followed by: Mast wire replacement and new anchor & steaming/deck combo light New switch panel accessible from the cockpit Bunk Extension Hinged suspended table Purchasing a Tilley hat
Interesting timing of this question as I just started measuring for relocating the mainsheet traveler in front of the companionway. Others who have made this change say it's the best mod they've ever done.
While I have not yet sailed this season (I blame Little League baseball), I am certain that leading the halyards and reefing line back to the cockpit along with the new sails and CDI furler will make this a different boat.
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote">for those of you who did the CDI furler... on CD it looks like it's half the price of a harkin setup.. are you happy with it/<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote"> I specifically installed a CDI furler because I need to frequently lower the mast. The CDI foil is plastic and can take the abuse better. If you want to be able to change out headsails the other brands are easier to do so. But, I am very happy with CDI. Get the optional bearings.
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by Davy J</i> I specifically installed a CDI furler because I need to frequently lower the mast. The CDI foil is plastic and can take the abuse better. If you want to be able to change out headsails the other brands are easier to do so. But, I am very happy with CDI. Get the optional bearings. <hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
thanks for that information. I like to race my boat in our club races and we do sometime change headsails while underway so being able to do that is important.
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by Davy J</i> <br />This thread got me thinking of my C25 Upgrades:
Larger Gas tank V-berth storage drawers Engel 125/12v fridge freezer New windows and portlights <hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
So where did you install the larger gas tank? Can you post a picture of how you did the V-brith drawers? Do you have the engle 125 installed some where of is it just sitting loose in the cabin? Are the new windows able to open?
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote">So where did you install the larger gas tank?<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote"> Tohatsu came with a 3 gallon tank. I got a 6 gallon tank to fit in the port fuel locker. <blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote">Can you post a picture of how you did the V-brith drawers?<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote"> We use this full size air mattress to sleep in the cabin:
So I removed the cushions, cut some carpet to fit the space and then added these drawers. They are not permanently mounted, bungees keep them from opening by accident:
This is a photo of the Engel and it's little brother a Dometic on our last trip:
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by DaveR</i> <br />Seeing a lot of "autopilot'. I guess I should go ahead and wire mine huh? After having it for 1 1/2 years<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">If you singlehand, I'd say it's the best thing after a roller furler. I've used a tiller pilot, but didn't have one on my C-25. I had a regular First Mate back then.
Our AP sits on the greywater tank. It is rarely put to use. I fond myself fiddling with the buttons and it is a distraction to me. If I need to go forward or what have you, I tie off the tiller, take care of things, and come back. Maybe I'm a control freak.
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by Prospector</i> <br />Our AP sits on the greywater tank. It is rarely put to use. I fond myself fiddling with the buttons and it is a distraction to me. If I need to go forward or what have you, I tie off the tiller, take care of things, and come back. Maybe I'm a control freak. <hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
When you say "our" AP, I'm thinking you aren't primarily a singlehanded sailor, which is where it really comes in to play. I rarely, if ever, use mine when out sailing with someone else and if someone is thinking about buying an autopilot and is not a singlehanded sailor, them I'd recommend saving your money as it will probably just go unused gathering dust somewhere. As to tying off the tiller with either rope or bungee, doesn't really work for the type of sailing I do.
I agree - Seeing a lot mentioning an autopilot has their best improvement. For river sailing, I have not given it that much thought since I probably have to tack more than most that are in relatively pen water. However, it would probably come in handy when I am raising my main and mostly when taking down the sail before coming into the marina. right now, I just use a line to secure the tiller to maintain a straight course which never turns out to be straight but I make do and it works for me....but sounds like an autopilot is another thing for me to give another look at....but they seem rather expensive for my mostly just putting up and taking down the main.
I agree Don there likely a lot of differences between the sailing you and I do. I tend to have sails of about 3 to 7 hours at a go, and don't have to deal with ocean swells so much as short steep chop. Frankly I would be ill-equipped to deal with much that you ocean sailors talk about. I'll never cross a river bar, and I have never had to read a tide table.
I do however spend a lot of time alone on the boat. Most of the lake crossings I do are alone, and many races are as well. In the steep chop, typical of Lake Simcoe the AP is pretty useless. Anytime I am pointing and wave heights are much over 2 feet, I can pretty much write of the AP. If the waves are less than that, I don't feel like I need an AP since things run pretty smoothly and steering is a pleasure, not a chore. When we are in a dead calm and I really want to use the AP while I do chores, steerage sucks no matter how the boat is being driven and I exert great amounts of energy to try and maximize every whisper and zephyr that comes my way without doing anything sudden to lose momentum. The AP fails me when I am looking for 1/10th of a degree course adjustments and it wants to corner harder. On the other end of the spectrum, at winds of 25 knots plus, using an AP is pretty risky, considering the strains on the rig. Last year we only had two races at over 35 knots of wind, and I did have my 13 year old out with me, she does well on the helm if I need her, but only for a short spell. Doing the night race at over 25 knots at 2 AM singlehanded was also interesting. That course was around 35 nautical miles by Google Earth. Neither of those would have seen use of the AP no matter how much I liked the machine.
If I have guests aboard for a pleasure cruise, they are usually pleased to take the helm, and I am happy to give it up. You are right, those are not times when AP would come to see much use.
Notice: The advice given on this site is based upon individual or quoted experience, yours may differ. The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.