Catalina - Capri - 25s International Assocaition Logo(2006)  
Assn Members Area · Join
Association Forum
Association Forum
Home | Profile | Register | Active Topics | Forum Users | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 Catalina/Capri 25/250 Sailor's Forums
 General Sailing Forum
 Need help sizing running rigging kit.
 New Topic  Topic Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

atgep
Master Marine Consultant

Member Avatar

1009 Posts

Initially Posted - 04/19/2004 :  23:28:44  Show Profile
I bought a few lines from a rope company called Cajun trading. The owner is looking to put together a complete KIT of running rigging. Any suggestions for length and size would be appreciated. They are already selling kits for other boats on ebay. My rope should arrive by the end of the week. I will let you know what I tink of it. Their website is

www.cajuntrading.ca

I will let you know when he comes up with a price.


PO of 1988 Wing HN 5775
"Cote d'Azure"
Fleet 25

Edited by - on

Champipple
Master Marine Consultant

Members Avatar

USA
6855 Posts

Response Posted - 04/20/2004 :  08:25:30  Show Profile  Visit Champipple's Homepage
ATGEP -

First Step in Running Rigging - Its line, not rope

You'll find that these measurements will provide more than enough line
Halyards - You'll should have more than enough line if you take the e and I measurements and the corresponding hypotenuese. For a standard rig - e is just short of 10 feet, I is 29 feet. The hypoteneuse is 30...Roughly 70 feet should allow you to run the line back to the cockpit, and go as far aft as the stern rail in case of emergency.

Jib halyard - E measurement + I measurement + Luff (headstay length)... or 10 + 29 + 30

Jib Sheets should be at least 1.5 times the length of the boat.

Spin Sheets - 2 times the length of the boat

Boom Vang and Main Sheet - (Distance between blocks plus Tail length) * (number of sheaves)

Edited by - on
Go to Top of Page

rclift
Navigator

Members Avatar

USA
152 Posts

Response Posted - 04/20/2004 :  09:21:23  Show Profile
I saw their kits on Ebay, also. Price for Jib and Main halyard kit with snap shackle and splice were really reasonable. 155.00 range but what kind of quality is the question. Let us know! You might want to clue him in on all the variations that C25 sailors would be interested in so they could label their products better: tall rig, line diameter, all rope.

Edited by - rclift on 04/20/2004 09:26:03
Go to Top of Page

PZell
Admiral

Members Avatar

USA
548 Posts

Response Posted - 04/20/2004 :  11:33:57  Show Profile
Waaal....If you want to split hairs...Technically it's rope until
it's applied on the vessel, then it becomes line (but not always).


Edited by - on
Go to Top of Page

Derek Crawford
Master Marine Consultant

Members Avatar

USA
3324 Posts

Response Posted - 04/20/2004 :  11:38:42  Show Profile
Splitting hairs even further....it's rope when it's on the spool. Cut some off and it becomes line, take it on the boat and it becomes whatever its designated.
Derek

Edited by - on
Go to Top of Page

atgep
Master Marine Consultant

Members Avatar

1009 Posts

Response Posted - 04/20/2004 :  11:45:08  Show Profile
My order arrived today. It was shipped overnight. I ordered 200 ft of 5/16 to rig the new spinnaker. The rope looks identical to the west marine sta set x and cost me $.40 at foot including shipping. It weighs in at 6.2 lbs for the 200 ft. I have no idea about durability or stretch but will post feedback after I use it.

BTW The line would be called "small stuff" in the Navy.

Edited by - on
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Topic Locked
 Printer Friendly
Jump To:
Association Forum © since 1999 Catalina Capri 25s International Association Go To Top Of Page
Powered By: Snitz Forums 2000 Version 3.4.06
Notice: The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.