Catalina - Capri - 25s International Assocaition Logo(2006)  
Assn Members Area · Join
Association Forum
Association Forum
Home | Profile | Register | Active Topics | Forum Users | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 Catalina/Capri 25/250 Sailor's Forums
 Catalina 25 Specific Forum
 Red coloration on non skid areas
 New Topic  Topic Locked
 Printer Friendly
Next Page
Author Previous Topic Topic Next Topic
Page: of 2

trent
1st Mate

Member Avatar

USA
44 Posts

Initially Posted - 06/06/2004 :  15:22:21  Show Profile
Greetings,

I have a discoloration on my 25 on the non skid. It is reddish in color and will not come off. Have I gone through the gel coat or is it some kind of sunburn?? If I've gone through the gel coat what is the fix?

Thanks - Trent

Edited by - on

Sea Trac
Master Marine Consultant

Members Avatar

Vanuatu
1357 Posts

Response Posted - 06/06/2004 :  15:45:30  Show Profile
Possibly tantric acid from leaves? Have you tried oxalic (sp?) acid?

Edited by - on
Go to Top of Page

Lightnup
Master Marine Consultant

Members Avatar

USA
1016 Posts

Response Posted - 06/06/2004 :  18:21:10  Show Profile
I have the same thing on a patch of the non-skid near the front hatch on my C25. Almost looks like the white color has worn off. Having just purchased the boat, I haven't had time yet to research what to use on it.

Steve

Edited by - on
Go to Top of Page

oldsalt
Admiral

Members Avatar

USA
578 Posts

Response Posted - 06/06/2004 :  20:37:13  Show Profile
Might this be some sort of fungus or mildew?

Edited by - on
Go to Top of Page

OJ
Master Marine Consultant

Members Avatar

USA
4382 Posts

Response Posted - 06/06/2004 :  23:09:53  Show Profile
If the gel coat was wearing thin you would more likely see a dark grayish/green color.

If a non-skid repair is called for there's an article in the current issue of EPOXYWORKS magazine by West Systems.

http://westsystem.com/ewmag/ - see the article titled <u>Repair non-skid and get professional results</u>

Good luck and let us know what it turns out to be!

Edited by - OJ on 06/07/2004 09:23:32
Go to Top of Page

frogger
Navigator

Members Avatar

USA
184 Posts

Response Posted - 06/06/2004 :  23:32:24  Show Profile
Sounds like Georgia red clay. Very difficult to remove.

Edited by - on
Go to Top of Page

trent
1st Mate

Members Avatar

USA
44 Posts

Response Posted - 06/07/2004 :  10:32:21  Show Profile
So I'm not crazy, good. I have no clue what Georgia red clay is but the boat is from Houston if that helps. She has sat in a slip since in Oklahoma. This discoloration is much more pronounced on one side. I don't want to Poliglow it "in".


Edited by - on
Go to Top of Page

Lightnup
Master Marine Consultant

Members Avatar

USA
1016 Posts

Response Posted - 06/07/2004 :  11:51:03  Show Profile
Trent - That doesn't necessarily mean you're not crazy, it just means that if you are, you're not alone.

<i>Wind Point </i>has been in Texas and South Florida waters only so I know it's not red Georgia clay. Hope it's not Bondo.

Steve

Edited by - on
Go to Top of Page

trent
1st Mate

Members Avatar

USA
44 Posts

Response Posted - 06/07/2004 :  11:59:28  Show Profile
Really don't think it is bondo. If it is then a genius with great dexterity and the eye of a hawk did the work.

Well I'm very curious now that I've stumped this list. I'm also curious since another person reports this. My girlfriend was sure that we'd gone through the finish and I was starting to believe that..

I have some stain remover on the way from sailnet so we'll see how that does on it.


Edited by - on
Go to Top of Page

RichardG
Admiral

Members Avatar

USA
990 Posts

Response Posted - 06/07/2004 :  12:01:51  Show Profile
Before you do anything drastic, I would try a good hull cleaner on it first. [url="http://www.boatersworld.com/webapp/wcs/stores/servlet/ProductDisplay?storeId=10051&catalogId=10051&langId=-1&productId=659142"]On & Off[/url] seems to work well on discolorations like that. It's kind of strong, so make sure to rinse well anything it gets on.

Edited by - on
Go to Top of Page

Lightnup
Master Marine Consultant

Members Avatar

USA
1016 Posts

Response Posted - 06/07/2004 :  12:23:31  Show Profile
I just went down to the boat and I can tell you 5 things that DON'T work:

Tilex
Oil Eater cleaner/degreaser
Soft Scrub
Star-Brite mildew remover
409 glass and surface cleaner.

The red spots on my boat are just aft of the anchor locker, starboard side, on and along the edge of the non-skid surface.

Steve

Edited by - on
Go to Top of Page

trent
1st Mate

Members Avatar

USA
44 Posts

Response Posted - 06/07/2004 :  12:27:15  Show Profile
Should have mentioned that Soft Scrub doesn't even touch it, whatever it is. Could have saved you some time trying that one.

I had normal black spots in the cockpit that came off with a scrub brush easily. Whatever this is doesn't seem like it will ever come off.

Mine is in the same place but sounds like it is more wide spread.

I'll try to go and get some On & Off. Great tip, I've never heard of that one.


Edited by - on
Go to Top of Page

austin72
1st Mate

Members Avatar

48 Posts

Response Posted - 06/07/2004 :  12:43:51  Show Profile
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by Lightnup</i>
<br />
The red spots on my boat are just aft of the anchor locker, starboard side, on and along the edge of the non-skid surface.

Steve
<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">

OK, this may be a dumb thought but since I have a ton of those, is it in an area where a mooring line could have leached pigment and stained the boat?

Edited by - on
Go to Top of Page

trent
1st Mate

Members Avatar

USA
44 Posts

Response Posted - 06/07/2004 :  14:23:16  Show Profile
Actually that's a really good guess but looking at it I don't think so. There is some of this discoloration on the other side but it is minor. Weirdest thing, been driving me crazy trying to think what could cause it.

Edited by - on
Go to Top of Page

Kip C
Navigator

Members Avatar

USA
243 Posts

Response Posted - 06/07/2004 :  17:06:32  Show Profile
Possibly your stain is rust, from something that sat on the deck for to long? I'd recommend a product called Cleaning Detail by MaryKate and a green scrub pad. On-Off is also a MaryKate product, but is for limited use( requires rubber gloves and makes your nose hairs curl). Cleaning Detail is for the whole deck and is biodegradable. I swear by the stuff. Good luck!

Edited by - Kip C on 06/07/2004 17:17:32
Go to Top of Page

Lightnup
Master Marine Consultant

Members Avatar

USA
1016 Posts

Response Posted - 06/08/2004 :  10:31:44  Show Profile

<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by Austin72</i> OK, this may be a dumb thought but since I have a ton of those, is it in an area where a mooring line could have leached pigment and stained the boat?<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">

I just spoke with the PO and he says the 150 headsail has red sheets (I haven't taken the jib or jenny out of their bags yet so didn't know that). Hmmmm. If that is where the discoloration came from, you'd think it would be on port and starboard.

On the other hand, there is about a 1' by 2' dark section (not red) on the front corner of the cabin, just above the deck, where the gelcoat has been worn down by the running rigging. It is only on the starboard side, though, not on the port. Maybe this guy only knew how to sail on a starboard tack?

Steve


Edited by - on
Go to Top of Page

John Mason
Admiral

Members Avatar

USA
687 Posts

Response Posted - 06/08/2004 :  14:39:17  Show Profile
"Tantric" acid - that'd be some powerful stuff!

Tantric - A ceremonial treatise related to Puranic and magic literature; esp., one of the sacred works of the worshipers of Sakti.


Edited by - on
Go to Top of Page

Sea Trac
Master Marine Consultant

Members Avatar

Vanuatu
1357 Posts

Response Posted - 06/08/2004 :  23:18:02  Show Profile
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by John Mason</i>
<br />"Tantric" acid - that'd be some powerful stuff!<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">
Don't have time to look up what I meant right now, so let's just chalk it up to a Freudian slip.

Edited by - on
Go to Top of Page

trent
1st Mate

Members Avatar

USA
44 Posts

Response Posted - 06/09/2004 :  14:26:32  Show Profile
Hah, J.B. I think you meant to say <u>tannic acid</u>...

I bought some Davis Fiberglass stain remover. We'll see what that gets me. I think it is primarily oxalic acid.

Thanks for the advice all, I'll report in with my success or failure so Steve can glean something from it hopefully.

\trent

Edited by - on
Go to Top of Page

ClamBeach
Master Marine Consultant

Members Avatar

3072 Posts

Response Posted - 06/09/2004 :  23:03:30  Show Profile
"I bought some Davis Fiberglass stain remover"

Works very well on most common grunge... won't touch other things like Cetol drippings !
As far as the grunge is concerned, you'll probably be amazed at how white your boat really is after the Oxalic acid treatment.

Note that it leaves the fiberglass somewhat dulled and you will probably want to wax or poly-glo the surfaces you've treated.

Edited by - on
Go to Top of Page

RL
1st Mate

Members Avatar

USA
76 Posts

Response Posted - 06/10/2004 :  13:31:55  Show Profile
My 78 has the same red stains. The stains are only on my non skid plates. I think that rules out stain from the lines, or I'd see the same red stain on the white portions around the stained plates. I was assuming that the stain was the undercoat showing through and the only cure was to repaint the plates.
I am very intersted in anyone's solution to this. I've scrubbed, with every over the counter cleaning agent I know of and I haven't made a dent. I've looked at other 25s of my vintage and some have the stains and others don't.
If the cure is to repaint, well that might be the next winter project.

Edited by - on
Go to Top of Page

Derek Crawford
Master Marine Consultant

Members Avatar

USA
3324 Posts

Response Posted - 06/10/2004 :  14:39:44  Show Profile
"Maybe this guy only knew how to sail on a starboard tack?"
Well, at least he'd have ROW all the time (unless he was racing!)
Derek

Edited by - on
Go to Top of Page

trent
1st Mate

Members Avatar

USA
44 Posts

Response Posted - 06/10/2004 :  15:38:10  Show Profile
RL,

I'll post what I find out tomorrow. Apparently I'm barking up the wrong tree with the Davis stuff. Darn.

I did spill some Cetol a couple of weeks ago, how'd you guess? What takes that off? Acetone?

\trent

Edited by - on
Go to Top of Page

Sea Trac
Master Marine Consultant

Members Avatar

Vanuatu
1357 Posts

Response Posted - 06/10/2004 :  16:20:23  Show Profile
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by trent</i>
<br />Apparently I'm barking up the wrong tree with the Davis stuff. Darn.<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">
Perhaps not, there's a reason your marina is named REDbud, after all.

Edited by - on
Go to Top of Page

ChrisDara
1st Mate

Members Avatar

USA
88 Posts

Response Posted - 07/08/2004 :  14:10:45  Show Profile
I think it is a stain from the dye in the lines. I just bought a '79 Catalina 25 and it has the same thing. The furling jib line is red. The previous owner also got varnish on the gelcoat. It was really in the gelcoat badly.

I got that out with a product called Interstrip 299E. Here it is on
West Marine's website:

http://www.westmarine.com/webapp/wcs/stores/servlet/ProductDisplay?storeId=10001&langId=-1&catalogId=10001&productId=72324

It is a paint thinner that is safe for gelcoat. It's pretty expensive but it works. I scrubbed it out with a brass brissle brush. If it got the varnish out I would suspect it would get anything out. It takes a little time but works. You can try it or I'll reply when I get the red out of my non-skid.

Hope that helps!

Edited by - on
Go to Top of Page

frich
Captain

Members Avatar

USA
418 Posts

Response Posted - 07/11/2004 :  21:21:32  Show Profile  Visit frich's Homepage
Just had the same thing happen on my boat. I believe it was some type of reaction to a cleaner I was using,
What I did was mix some oxalic acid with water, a bit to the strong side. Scrubbed very easily and rinsed. Within a day the stain was completly gone,

Frank R
84 Sk C25

Edited by - on
Go to Top of Page
Page: of 2 Previous Topic Topic Next Topic  
Next Page
 New Topic  Topic Locked
 Printer Friendly
Jump To:
Association Forum © since 1999 Catalina Capri 25s International Association Go To Top Of Page
Powered By: Snitz Forums 2000 Version 3.4.06
Notice: The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.