Catalina - Capri - 25s International Assocaition Logo(2006)  
Assn Members Area · Join
Association Forum
Association Forum
Home | Profile | Register | Active Topics | Forum Users | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 Catalina/Capri 25/250 Sailor's Forums
 Catalina 25 Specific Forum
 converting to a holding tank
 New Topic  Topic Locked
 Printer Friendly
Previous Page
Author Previous Topic Topic Next Topic
Page: of 3

lcharlot
Master Marine Consultant

Members Avatar

Antigua and Barbuda
1301 Posts

Response Posted - 09/05/2004 :  12:10:40  Show Profile
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by pierrem</i>
<br />my 84 has a pump out cap on the stbd side walk around. The boat has a porta potty and not connected to the shank. Does this mean that at some point there was a holding tank or did Catalina plumb in the pump out cap and shank?

PIerre
<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">

Could be that some PO was going to install a marine head, started the job with installation of the deck fittings, then changed his mind and never did the rest of the installation. Or, if the deck fitting was put on at the factory, it could have been due to a mistake on the purchase order or something similar.

Edited by - on
Go to Top of Page

Buzz Maring
Master Marine Consultant

Members Avatar

USA
1768 Posts

Response Posted - 09/05/2004 :  13:25:07  Show Profile
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by pierrem</i>
<br />my 84 has a pump out cap on the stbd side walk around. The boat has a porta potty and not connected to the shank. Does this mean that at some point there was a holding tank or did Catalina plumb in the pump out cap and shank? - PIerre<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">

Hi Pierre,

The cap you describe is right where the fresh water fill inlet is ... is there any chance you've confused the two?

Edited by - on
Go to Top of Page

ClamBeach
Master Marine Consultant

Members Avatar

3072 Posts

Response Posted - 09/05/2004 :  13:52:35  Show Profile
"pump out cap on the stbd side walk around."

I'm with Buzz on this... all the C25's I've seen have the head on the portside.
Having a pumpout on the starboard side would require some rather unusual plumbing.

Edited by - on
Go to Top of Page

pierrem
1st Mate

Members Avatar

64 Posts

Response Posted - 09/05/2004 :  13:55:30  Show Profile
portside it is....you guys are sharp!

Pierre

Edited by - on
Go to Top of Page

oldsalt
Admiral

Members Avatar

USA
578 Posts

Response Posted - 09/05/2004 :  17:32:26  Show Profile
Yeah, the fresh water tank fill is on the starboard side. Inserting a pumpout hose there is a mistake you don't even want to make once.

Edited by - on
Go to Top of Page
Page: of 3 Previous Topic Topic Next Topic  
Previous Page
 New Topic  Topic Locked
 Printer Friendly
Jump To:
Association Forum © since 1999 Catalina Capri 25s International Association Go To Top Of Page
Powered By: Snitz Forums 2000 Version 3.4.06
Notice: The advice given on this site is based upon individual or quoted experience, yours may differ.
The Officers, Staff and members of this site only provide information based upon the concept that anyone utilizing this information does so at their own risk and holds harmless all contributors to this site.